Burst Tester for PET Bottle testing

BarstdruktesterIn addition to 2-piece and 3-piece aerosol cans, the ABT-2000 can also be adapted to fit PET, monobloc and aluminum bottles with even the softest curl.

The Aerosol Can Burst Tester is a semi-automated burst / buckle tester designed to check the pressure at which the aerosol can end will buckle, and the pressure at which the aerosol can will burst.

The can or bottle is placed in a specially designed holder* which allows it to hang freely. For safety, the Aerosol Can Burst Tester automatically fills the aerosol can with water, and then slowly adds air pressure to the can. The preprogrammed test sequence then begins. Values are automatically recorded for top buckle, bottom buckle, and burst pressures (the tester can automatically assign which end burst). Optionally, one or two thresholds may be programmed into the test sequence, allowing the can to be held at a desired pressure for a specified length of time.

barstdruktester incl. intern reservoirThe Aerosol Burst Tester can accommodate a wide range of containers, including 3-piece and Monobloc aerosol cans. Adapters are available for Aluminum Bottles and 15 mm C-2 Monobloc Cans.

Available with optional internal water supply.

The Closed Water Circuit available with the ABT-2000 stores clean water below the tester, and is recycled and filtered after testing. Eliminating the need for running water lines and drainage, the Closed Water Circuit conserves water while keeping the ABT-2000 free of impurity build up.

The results are shown on the display and may be saved or printed out via serial printer. Results are also available for data transfer either directly into a plant-wide data collection system, or for data transfer directly into Visionary QC or other data acquisition software. The test is also graphed [pressure over time] on-screen.

Technical Information:

 Attributes Measured: Burst and Buckle
 Max Height: 300mm
 Max Test Pressure: 450 lbs (30 bar)
 Diameter Range: 40-100mm
 Output Interface: RS232
 Electrical Power Required: 100-240VAC 50-60Hz
 Air Pressure Required: 90 psi (6 bar) (water supply also required)
 Weight: 40 kg (88 lbs)

afvullen vloeistoffen flowpacker toploader kopen folieverpakkingsmachine kartonneermachine dozenopzetmachine doppensluiter palletwikkelaar prijs labelmachine kopen omsnoeringsmachine kopen