Endmaking

END-O-MAT System

The END-O-MAT system turns thin sheet into fat profits.
As a multi-die production line for lids, EO shells, rings, bottom ends and twist-off caps, the END-O-MAT system was designed to meet the technical and commercial endmaking challenge of the future.

Stamping Press

stamping press multi dieMULTI-DIE Presses.
Compining strength with precision, the advanced four-point drive system on the END-O-MAT MULTI-DIE stamping press eliminates the need for slide guiding set-ups.

With a minimal deformation of less than 0.01 mm (0.0004”), this stamping press and mechanically synchronized four-point drive combined with a hydraulically pre-tensioned press table (not welded into position) maintains parallel alignment of the die set and dispenses with parallelism errors.

END-O-MAT press with 150 t
High speed press for stamping of ends and shells
Press force 1500 kN
Capable for operation two row tooling at up to
250 spm with CNC roller straight sheet feeder
Capable for operation two row tooling at up to
275 spm with CNC roller coil feeder

END-O-MAT press with 50 t
High speed press for stamping of ends and shells
Press force 500 kN
Capable for operation one row tooling at up to 230 spm with CNC zigzag sheet feeder

Disc curler

Flawless curling on round and non-round ends is a prerequisite for flawless seams

disc curlerDisc curler for round ends
Stamped ends with an initial curl are processed in a special disc curler for round ends, which features a fixed curling segment and a rotating curling disc. Its large diameter of approx.1085 mm for steel ends (approx. 850 mm for EOE aluminum shells for beverages) provides the curler with a sufficiently long line of contact to allow even ultra-thin end material (DR) to be curled accurately at high speeds of up to 2000 epm. The curler is designed for fast changeover.

Curling press
Non-round ends are process in a full-curling transfer press. Here, the shells are curled around the circumference in – for example – two or three steps by a multi-fold die using a conventional upper drive press. The capacity of such a line depends mainly on the specific transfer-curling die.

Rotary liners

Cantec manufactures high-speed rotary liners for all types of compunds applications.
liner
These state-of-the-art systems offer capacities between 300 epm and 2000 epm with three-, four-, six-, or eight-fold tooling, diameter ranges between 46 mm (11.4”) and 153 mm (6.03”). Lined ends are reproducible and the operator-friendly menus feature a size-dependent parameter memory (accessed when changing to a different size). Compound placement position is improved because the nozzle positions of the lining guns can be adjusted separately in radial (for diameters) and axial (gun height) directions, both by means of a threaded spindle.

P4 strip stamping press

Equipped with single and double tooling, the P4 is ideal for stamping and deep drawing caps.
PressP4
The P4 strip feed press was designed to manufacture round and non-round ends, shells and cap shells. It operates with single- or double-die tooling and has an integrated mechanical strip feed system for automatic feeding with primary-scrolled, secondary-scrolled or straight-sided strips. It comes with a hydraulic overload safety device and features a four-fold, hydrostatically pre-tensioned, guided ram. This guarantees the same position in all working conditions, i.e. no displacement in the upper or lower part of the tool.

The system also features a DAR single or double disc curler with conveying equipment from the press and to the double head liner for round ends and shells.

Scroll shear

The scroll shear is capable of producing straight trimmed or primary scrolled strips for end production. Unlike the slitter system, which has rotary cutters, it is a stamping shear.

The scroll shear is a highly versatile piece of machinery and can be used to process bright, lacquered and printed sheets made of tinplate, TFS and aluminum. It features a flexible, modular design that facilitates individual add-ons. Other attractive advantages include optimum handling and minimal changeover times. It also has scroll strip magazine for the fully automatic collection of scroll trips on pallets.

combined slitterCombined slitter

This combination of single-gang slitter and scroll shear facilitates the processing of straight-sided sheets into scrolled strips.

The combined slitter retains all the advantages of the single-gang slitter and scroll shear. No additional tools are required for the trimming equipment when processing sheets of different sizes.

afvullen vloeistoffen flowpacker toploader kopen folieverpakkingsmachine kartonneermachine dozenopzetmachine doppensluiter palletwikkelaar prijs labelmachine kopen omsnoeringsmachine kopen