Top Load Tester for Plastic Containers

The Top Load Tester was developed specifically for the measurement of the top load resistance of empty PET bottles and other empty containers.

The device measures a container’s maximum axial load capacity in Kg, Newton (N) or lbs. To perform the test, one PET bottle or other container is placed on the device table and the upper plate moves down at a user specified speed, slowly increasing pressure on the container.

For different test forces, the device has three test modes: Maximum Force Test, Compression Test and Force Test.Data Top Load Tester

The results are shown on the display and may be saved or printed out via serial printer. Results are also available for automatic data transfer either directly into a plant-wide data collection system or for data transfer directly into Visionary QC or other data acquisition software.

Technical Information:

 Attribute Measured: Axial Load
 Test Speed: User Defined
 Air Pressure Required: 6 bar minimum
 Maximum Force Applied: 500kg @ 6bar
 Output Interface: RS232C
 Weight: 25.0 kg
 Maximum Height: 50 cm / 19.7 in
 Electrical Power Required: 100-240 VAC 50-60 Hz
 Languages: Available in Many Languages
 Marks Allocation: 1-20
 Measurement Units: kg, N, lbs
 Dimensions: 500mm x 350mm x 380mm

afvullen vloeistoffen flowpacker toploader kopen folieverpakkingsmachine kartonneermachine dozenopzetmachine doppensluiter palletwikkelaar prijs labelmachine kopen omsnoeringsmachine kopen